Aero Instruments & Avionics, Inc.
7290 Nash Road
North Tonawanda, N.Y. 14120.
HTTP://www.aeroinst.com
Each unit will have a return to service tag affixed indicating
the date that warranty will start.
BENCH TEST AND CERTIFICATION
On units that are only bench tested and found to be within tolerance as
described by the manufacturers specifications, there will be no warranty implied.
REPAIRS
Aero Instruments & Avionics, Inc. liability hereunder is conditioned on defects
becoming apparent within six (6) months or 600 flight hours from date of shipment of such
item to the first user. This warranty does not give full coverage on ANY failure during
this time period, but is limited to the repair or replacement of the parts and / or
sub-assemblies replaced during the service action.
OVERHAUL
Aero Instruments & Avionics, Inc. liability hereunder is conditioned on defects
becoming apparent within twelve (12) months or 1000 flight hours from date of shipment of
such item to the first user. This warranty covers labor & parts previously replaced by
Aero Instruments & Avionics, Inc. at time of overhaul.
NO FAULT FOUND RETURNS
If a unit is removed from an aircraft and found to meet all of the manufacturers
test specifications, the customer will be responsible for the bench test and
recertification charges.
ELECTRONIC COMPONENTS
Electronic components are tested and their function verified at the time of test.
There is no way to verify the service life of an electronic component without destroying
it. Therefore it is Aero Instruments policy to warranty only the electronic components
replaced at the time of repair / overhaul.
SPECIAL CONSIDERATIONS
AIA will assign material and parts warranties to Customer for all components
or subassemblies serviced, to the extent permitted by the manufacturer or supplier,
in accordance with their published warranty.
EXCLUSIONS TO WARRANTY
Warranties for units that have been subjected to misuse, neglect, or contamination;
damaged by accident; rendered defective by improper storage, installation, removal,
operation, or maintenance; by aircraft or aircraft wiring.
Any component received with the warranty seals removed, repair or alteration at a place
other than Aero Instruments & Avionics, Inc., unless such work was performed with the
Express written consent of AIA, are excluded.
WARRANTY CLAIM PROCEDURES